In contrast to an inverting amplifier, the output signal of a non-inverting amplifier is out of phase with the input signal. One op amp and two resistors can be used to build either inverting or non-inverting op amps, just in different ways.
The signal is applied to the inverting input of the inverting operational amplifier circuit, and the non-inverting input is connected to the ground. The output of this kind of amplifier is 1800 times out of phase with the input, so if a positive signal is applied to the circuit, the output will be negative. By expecting the Operation Amp is great, then, at that point, the idea of virtual short can be applied at the info terminals of the Operation Amp. so that the voltage at the non-inverting terminal and the inverting terminal are equal.
Non-Inverting Operational Amplifier
The circuit that is produced when the signal is applied at the non-inverting input is referred to as a Non-Inverting Op-Amp. When a positive voltage is applied to the circuit, the amplifier’s output will also be positive because it is exactly in phase with the input. The concept of virtual short, in which the voltages at the inverting and non-inverting terminals are equal, can be applied if the Op-Amp is assumed to be ideal.