Sensors & Actuators Certification Course
About Sensors & Actuators Certification Course
Sensor and actuator systems form a crucial part of the modern world. In specific to a given system, the application and utilization of the sensors and actuator changes. With the continuous advancements in the vehicle systems, the dependency on advanced sensors and actuators is increasing, on a simultaneous bias. This course makes a very fine balance between the sensor/actuator technology and the automotive sector.
This course worked with a series of sensor systems, including, Voltage sensor, current sensor, Potentiometer, IR Sensor, Ultrasonic distance sensor, Motion sensor, Gyroscope, Touch sensor, Fingerprint scanner and actuator systems, including DC Motor, Servo Motor, Stepper Motor, Relay, Latch lock and Linear actuator. In order to provide the necessary connectivity with that of a vehicle system, the course works on a series of technical projects on the interfacing of these covered sensors/actuators over a vehicle application.
With more than 5 minor and major projects, the implementation of simulation toolboxes, this course gives the right essence of technical training and practical exposure.
DIY Project
Every DIYguru course comes with a Do It Yourself project which you can do and learn by doing at your comfort. Our goal is to make sure you are able to implement your learning in real-world scenerio.
Internship
Every candidate after successful completion of the project submit a pitch presentation video, explaining his/her project-oriented achievements and results, which enables them to do one month of internship with us.
Certification
We are the only platform in india approved by National Education Alliance for Technology - NEAT, AICTE, Ministry of Education, Govt. of India along with Automotive Skills Development Council.
Benefits of learning from DIYguru
Proactive Program Support
Dedicated Program Manager to solve your queriesDual Certificate from Govt. of India
Avail certification from ASDC & AICTE, Ministry of Education, Govt. of IndiaLearn anytime anywhere
Learn through online videos by world class faculties.
DIYguru alumni are working at various roles in
What will you learn in this course
- Sensors and actuators: Intro, working and applications
- Energy conversion in transducers
- Analog vs digital sensors
- Setting up software and hardware for interfacing
- Basics of programming
- Sensor interfacing: Current, voltage, proximity, touch, force, fingerprin,t, gyroscope etc.
- Actuator interfacing: Linear actuators, solenoid, relay, DC motor, Servo motor, stepper motor
Introduction to sensors
Why do we need sensors?
How does a human body senses the environment?
Sensors in automotive vehicles
What are transducers?
Signal conditioning in transducers
Working of transducers
Types of sensors
What is Nodemcu?
Specifications of nodemcu
Architecture of nodemcu
Downloading and installing arduino IDE
Adding Nodemcu board in arduino IDE
Testing using example sketch
Comments
System defined functions
Setup and loop functions
Set digital signals
Pulse width modulation
Set analog signals
Read digital signals
Read analog signals
Serial monitor
User defined functions
Conditional loops
Logical operators
Working of given sensor(List of sensors given below)
Schematic
build circuit on breadboard
Programming
Applications
Troubleshooting
Sensors covered
Voltage sensor
Current sensor
Potentiometer
IR Sensor
Ultrasonic distance sensor
Motion sensor
Gyrocope
Touch sensor
Fingerprint scanner
What are actuators?
Working of actuators
Applications of actuator
Types of actuator
Working of given component(List of actuators given below)
Schematic
Build circuit on breadboard
Programming
Applications
Troubleshooting
Actuators covered
DC Motor
Servo Motor
Stepper Motor
Relay
Latch lock
Linear actuator
Softwares used: Arduino IDE, Fritzing
Power monitoring
Intruder Alarm
Touch lock
Biometric lock
Hand gesture motor speed and direction controller
Stepper motor controls
Servo motor controls
Program Highlights
Self Paced Online Course
Learn from Industry Experts
Guided projects
24/7 Lifetime Support
+ Projects included with this course
apply your DIY knowledge to make / hack / invent application in real world .
Download the full list of project and choose your desired project, we will help you assign a mentor to complete.
Download the project list of project eligible in this course
Interested in doing live project?
DIYguru welcomes you to be a part of 1 month live project with a personalised technical mentor support.
Get the full curriculum
Download the full curriculum with topics and units explanation attached with the set of DIY Projects in this course.
Download Course Curriculum
Sample certificate
Globally verified Govt. approved Certificate
Certified by ASDC, Automotive Skills Development Council & NEAT, AICTE, All India Council for Technical Education, Govt. of India
Learner Stories
Hear #PowerAhead stories of career growth from our learners
“DIYguru has helped us a lot in improvising the concepts of electric vehicle design & engineering for our experienced and fresh employees. The trainers are of high quality and knowledgeable in terms of delivering the contents and making things understandable. We look forward to having a continuous relationship.”
| R Shashi Kumar, Head HR – Robert Bosch Engineering
Learners love DIYguru
Here’s what some of our 40,000+ satisfied learners have to say about studying with DIYguru Team.
"Very informative course, high quality in terms of quizzes and assignments, liked the project at the end of the course. Oh, and great support. Can recommend this one to my friends and colleaugues. Being the very first player in EV industry, DIYguru has been crucial to the EV ecosystem development in india"
"I have known DIYguru since 2013 when the first version Autosports india was launched and in last 6-8 years the platform has emerged as the leading maker's learning platform in india. Form me the team behind DIYguru has been the best support all through the journey after Bachelors till my master's"
"Some of the best customer service I've ever seen. Great platform for mechanical and electrical engineers to learn EV!"
"This is truly a 5 star experience for youngsters in india! keen to learn about EV Technology"
"The platform has helped me personally to build my career in renewable energy in Canada. Hope to see DIYguru in Canada soon. Five stars!"
"liked the course with wide range of calculations in EV, all tutors are very supportive."
"Automotive design with incredible knowledgebase in terms of support from Baja Tutor community of DIYguru is wonderful experience. Documentation on the web is also good. "
"Amazing content and great support from DIYguru community"
Recent Placements
Avg. Salary Package > 3.5L
66% Alumni Career Transitions
73+ Hiring Partners
50% Average Salary Hike
Featured In - Media Spotlight
The Automotive Skills Development Council (ASDC) has launched an Electric Mobility Nanodegree course in association with DIYguru.
आप इलेक्ट्रिक कारों के मैकेनिक बन सकते हैं, वर्कशॉप खोल सकते हैं या फिर पार्ट्स से जुड़ा बिजनेस कर सकते हैं.
पेट्रोल-डीलज की बढ़ती कीमतों से आने वाले समय में निजात मिलने की उम्मीद.
The increasing shift towards EVs will create a massive demand-supply gap of EV technicians available to cater to the problems in electric vehicles.
Awards and Recognitions
Frequently Asked Questions
Individual Courses can be done online mode only. To attend offline class you need to enroll for either Specialization, Nanodegree or PG Diploma program.
DIYguru centers are located in Delhi, Pune, Bangalore, Nepal, Bangladesh, Malaysia and Germany. To see the address, check Contact section of website.
Yes, all the individual courses, Nanodegree Programs, Specialization Programs and PG Programs are govt. approved.
NEAT (National Education Alliance for Technology) - AICTE, Ministry of Education, Govt. of India & ASDC, Automotive Skills Development Council.
Min. 12th pass can undergo this course. Students and Working Professionals with ITI, Diploma, BE / B.Tech or equivalent in domains such as Automotive, Mechanical, Electrical, Electronics can pursue this course.
One Month, however in case you are unable to finish the course in one month, you can request for an extension here - Contact.
One Project (Mandatory) + One Project (Optional)
No. For Practical Hands on Training, you need to enroll for either Specialization, Nanodegree or PG Diploma Program.
Yes, DIY KITs are available for this course, To avail it simply click on enroll button and it will shpw you the option of purchasing course specific DIY KIT.
Still have questions? Get in touch
Admission fee for this course is 5000 INR / 60 USD
During checkout, you will get the option of paying in EMI
You will be given 1 month access to this course, to get lifetime access, you need to pay 10,000 INR / 120 USD.
Admission process for individual courses is direct online, there is no requirement of any screening test. However for Nanodegree and PG programs, you need to appear for test before taking admission.
You can avail project based internship for this course upon successfull completion.
Stepwise procedure for the course enrollment with a 4-week internship project
- Step 1: Apply for the internship-based learning-based course and fill the application form.
- Step 2: Pay the necessary fee to enroll in the program.
- Step 3: The technical team of DIYuru will check your entered data, and will share the confirmation of acceptance as you will be shortlisted in the next 24 hours.
- Step 4: Once you are enrolled in the course, start working on the course videos, and given assignments, and complete the course at your own learning pace! With this, you shall receive the ‘course completion’ certificate.
Project-based Internship process
- Step 5: If you have applied for the ‘internship-based learning’, then the team DIYguru Support shall connect with you to share the date of the ‘live course certification examination!’. This examination will enable you to understand your current expertise and will allow us to define the best possible project for you! Students will get a minimum of 4 weeks for the examination preparation.
- Step 6: Once you clear the examination, the DIYguru technical mentors will contact you to enroll you in the ‘live project’. Since students will work on a live project, students will get enough time to prepare themselves before the internship project begins.
- Step 7:
Since it is an ‘internship’ based project, the students will be encouraged to work through the assigned project in teams and will be allowed to achieve the results on their own, with mentorship support from DIYguru! Allowing you to gain the actual skills as an ‘intern’! Enrolled students will get a minimum of 4-6 weeks to work and submit their project reports.
- DIYguru shall also allow you to work in groups or as an individual. However, at the end of the internship, each student shall submit a project report with all the results achieved, for evaluation by the DIYguru technical team.
- Every candidate after successful completion of the internship project shall also submit a pitch presentation video, explaining his/her project-oriented achievements and results, so that the participants can work on their communication and presentational skills simultaneously. With this, you shall receive the ‘Project-based internship’ certificate (along with evaluation score), and an ‘achievement badge’ to validate that you have successfully cleared the ‘certification examination’ (shareable on LinkedIn and other platforms).
The internship after the completion of course is unpaid.
Placement assistance in terms of access to the Job portal will be provided, and you will be added to the weekly job update newsletter section to receive opportunities available in our partner companies.
Still have questions? Get in touch
Related Blogs
“Women in E-Mobility” Scholarship by DIYguru.
Enabling Army Officers to be a part of India’s Electric Vehicle Revolution.
Get in touch to learn more about how you can make the best of your talent
Spend less time worrying about job availability, and more time growing your knowledge. Join DIYguru Program today.
If you’re a current student, please get in touch through the DIYguru dashboard to ask about more details of this Program.
Please note, eligibility for this course is reserved to students who have done related projects and have relevant profiles matching with the pre-requisite of this course.
The DIYguru team hold the right to cancel your admisssion into the program without any explanation via email if found unsuitable and unfit.
Our 7-day money-back guarantee starts from the moment of signup and runs through the free week. Cancellations between days 7 and 30 will get a prorated refund.
Fees for the program is charged only when the admission is approved.