Ola Electric Mobility Pvt. Ltd.

Position : Electric Vehicles/Charger System Validation Engineer

Key skills required:

 – Hands on Experience of Electric Vehicle Systems like Battery Pack, Battery Management     system,Charging System, Powertrain, HMI, DC-DC converter ,WiringHarness and Light driver unit .

– Hands on experience in power electronics components,safety and testing.

– Hands on Experience of battery cycler,thermal chamber and vibration chamber GUI operation.

 – Knowledge of communication protocols like Serial communication, CAN,I2C,SPI and UART.

– knowledge in connectivity protocols like GPS/GSM and bluetooth testing activities.

 – Hands on Experience in Performance/durability testing of Electric vehicles.

  – Execute the testing and validation processes (component level, system level and vehicle level testing)

Roles and responsibilities:

Support/execute the complete EV vehicle and charger Systems validation and testing activities.

• Execute the DVP test and setup of complete electric vehicle System level integration with all sub systems integrated (i.e BMS with Battery Pack, Charger, Motor, Motor Controller,PDU, DC-DC Converter, wiring harness and Dashboard etc.).
• Support/Handling on Powertrain testing and develop the automated test rig .
• Knowledge on schematic/Block diagram verification ,DFMA test case analysis and execution.
• Support on benchmarking and reverse engineering design analysis activities.  
• Strong Knowledge on wiring harness preparation ,PCBA board soldering and crimping techniques.
• Support the system/components level root cause analysis activities.
• Coordinate/ support the EMI/EMC test activities.
• Experience in Instrumentation/data logger and using Voltage,Current, CAN,CAN-FD and Temperature and vehicle dynamic sensors etc.

Experience:  3 to 6  years

Qualification: B.Tech/B.E./M.E./M.Tech

Seniority Level

Mid-Senior level

Industry

• Automotive 
• Aviation & Aerospace 
• Electrical & Electronic Manufacturing

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

Oben EV

Position: Electrical System Engineer-Electric Vehicles

Key Opportunity Attractions

• You will have the unique experience of creating an Indian Two-wheeler EV from scratch. Develop an EV “FOR the Indian market, BY the Indians, and which will OF the Indians.
• Intrapreneurial opportunity to Proto-type, develop and own the process of creating a unique product in the fast growing and futuristic market of electric vehicles.
• This is the Platform to capitalize on a tremendous opportunity presented by the EV market today.
• Experienced founders with an extensive network along with a history of rapidly building a Multi-Million Dollar organization in just a few years. Superb Learning platform
• Angel funding that provides stability and enables focus on building the product

Job Description

This is an exciting opportunity for an Electrical & Electronics Engineer responsible for supporting engineering and design teams to execute the design and testing of an electric vehicle.

As an Electrical and Electronics Engineer in our start-up journey, you will be involved in all phases of the EV development cycle, including new product development, validation, product modification, production testing, and post-sales support. Your responsibilities will include researching, designing, and integrating components such as motors, controllers, batteries, chargers, DC-DC converters, etc. You are required to work on both High voltage power electronics as well as Low voltage control electronics. The candidate will be responsible to carry out system simulation activities and analysis for vehicle control technologies including vehicle dynamics modeling and control and drive by wire systems.

Functional Competencies:

• B.Tech/M.Tech in Electrical/Electronic Engineering.
• Experience in Electrical Vehicles is preferred
• Must possess a good understanding of Power Electronics, Embedded Systems, Control Engineering, Electrical Machines, and Instrumentation.
• Strong programming skills needed to model and perform optimization/trade-off analyses
• Analytical rigor, as well as good intuition for Kinematics & Dynamics of mechanical components, are a big plus
• Knowledge in EMC/EMI design practices and the relevant validation testing
• Understanding of communication busses/protocols like Serial communication, CAN, etc. is desirable
• Good working knowledge of basic hand tools, soldering, wiring, and lab test equipment.
• Interest and foundational knowledge in EV powertrains as well as electrical, mechanical, and system-level design.
• Practical knowledge of component selection for application fit, reliability, and cost.

Seniority Level

Entry level

Industry

• Automotive

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

Bosch Engineering and Business Solutions

Position : Engineer Electrical Design – Wiring Harness

Required Skills:

• Electrical Engineering Graduate or equivalent education at least 5-8 years
• Good knowledge in Schematic design for Lithium Ion battery
• Good knowledge in Schematic design for Lithium Ion battery system
• Good knowledge in 3D Wiring harness routing design using UG-NX or CATIA
• Experience in circuit module design, layout and verification, including system power paths and FMEA interfaces with the battery
• Understanding of industry standard requirements for Li-ion batteries, with regards to compliance and certification
• Passion for Job and positive mindset
• Good in presentation and communication skills
• Good understanding of electric and electronic components like contractors, relays and connector
• Experience and overview of automotive standards like AIS 048 & 156, LV214 , ISO 11452 Road Vehicle standard , ISO 6722
• Strong documentation and writing skills
• Great knowledge and implementation of DFM
• Highly creative and intelligent use of current production methods in designs

Job Description

• Participate in design reviews as required – from concept phase through to release – contribute in identifying risks and outlining potential methods of implementation
• Study of requirement specification and should be able to interpret the requirement in to Electrical Requirement
• Identify the design risk, should be able to mitigate
• Execute schematic design for high voltage Lithium Ion battery solutions
• Prepare wiring harness design and routing for Lithium Ion Battery
• Prepare 3D, 2D manufacturing drawing as per Prepare 3D, 2D manufacturing design as per customer standard/requirement for harness
• Coordinate and support to manufacturing and assembly Line requirements at factory.
• Implement and Coordinate the execution of BPS PGL.
• Coordinate and ensure Line release with Engineering, Testing & Validation teams and manufacturing team
• Plan and implement fabrication and assembly of prototype components as determined by design and process complexity
• Validate the accuracy of manufacturing documentation and ensure quality of information for Line release to the manufacturing team.
• Ability to read and understand the system diagram
• Electrical engineers must solve complex problems while troubleshooting failed products

Qualifications

B.E / BTech Electrical

Additional Information

Electrical Engineering Graduate or equivalent education at least 5-8 years of experience in CAD / Drawing using Solid works/ CATIA

Seniority Level

Entry level

Industry

• Electrical & Electronic Manufacturing 
• Information Technology & Services 
• Computer Software

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

RACEnergy 

Position : Electrical Engineer

Responsibilities & Requirements:

You will be part of the technical team working on developing our battery swapping stations. You will be assisting the team on the electrical design of the swapping station. Your responsibilities and requirements are:

• Experience working with 33KV/11KV 230V.
• L.V Switchgear estimation, design, documentation & testing.
• Designing electrical systems, cable scheduling, cable sizing, cable laying, cable termination, using glands wherever necessary etc.
• Implementing safety systems, circuit breakers, transfer switches.
• Experience with electrical panels such as PCC, AMF, ATS, AHF. Analyzing and creating the maintenance schedule accordingly.
• Coordinating with DISCOMs to layout floor plan and resolve technical issues.
• Capturing electrical wiring and terminations along the peripherals in the CAD(AutoCAD, E-Plan, Promis.e) for error-free execution.
• Knowledge of ANSI, IEC standards.
• Bachelor’s in Electrical Engineer or equivalent
• 3+ years experience
• Bonus: Experience in the Electric Vehicle field

If you have any queries, please write to us at [email protected]

Seniority Level

Mid-Senior level

Industry

• Automotive

Employment Type

Full-time

Job Functions

• Engineering 
• Design

Apply Now

Bhartia Management Consultancy 

Position : Electric Vehicle Electronics and Electrical Specialist

Responsibilities :

-To define motor control and ECU and Vehicle control ECU given by customer. Define interface module for different vehilce components.

-Define appropriate motor control hardware depending on different types of motor and control algorithm.

-Defnition of microcontroller plotforms and associated circuits based on the system specifcation agreed with the customer.

-Ensure HW perforamnce as per system functional spec and EMI/EMC spec Conducting DFMEA for motor contrl unit and other contrl units

– Performing related design calulation/analysis/simulation and definig circuit components Managing project time line for HW development and ensuring

Required Candidate Profile

-of timely deleverable of HW design documentation (Schematics, BOM,Gerber data, etc) Monitoring proto board assy and board bring up.

-Monitoring the tests carried out on the proto ensuring propoer funcationality. Defining environmental and electrical validation plan including EMI/EMC.

-Co-ordinating with validation team to carry out the validation. HW trouble shooting for any HW failure and performing root cause analysis Carrying out DFM activity co ordination with MFG and process team to define effective manufacturing process.

-Define end of line test spec, ICT FCT test spec. Ensure availability of proto parts with test reports for the customer and internal activities as per project milestones.

-Carry out VA/VE activities for cost optimization. To keep the HW cost within the cost target.

Desired Skills and Experience

root cause analysis, continuous improvement facilitation, hw design, root cause, music making, motor control, hw development, bom, mfg, ecu, dfm, ict, root, dfmea, tests, vave

Seniority Level

Entry level

Industry

• Automotive 
• Mechanical Or Industrial Engineering 
• Financial Services

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

Tata Consultancy Services

Position : Vehicle Controller Unit (VCU) -EV Component Lead

Required Information

Details

Role: Vehicle Controller Unit (VCU) – EV Component Engineers

Required Technical Skill Set: EV component development, Writing RFI, RFQ. Supplier co-ordination

Desired Experience Range: 10-13 yrs

Location of Requirement: Chennai

Desired Competencies (Technical/Behavioral Competency)

(Ideally should not be more than 3-5)

1. Experience in Design and development of Vehicle controller for Electric vehicle.
2. Defining use cases for Vehicle Control mode, Torque management strategy.
3. Components E&E Architecture requirement Definitions (interfaces – Electrical and Electronics, Communication, Diagnostic database)
4. Experience with OEM/ Tier1, handled vehicle programs
5. Writing Component Technical requirement, RFQ, Validation plan
6. Hands experience in Auto Components EMI/EMC and Homologation
7. Supplier Co-ordination, Queries resolution
8. Component Calibration, EOL testing
9. Defining the process- Supplier qualifications, Validation, Checklist
10. Excellent knowledge of Regulatory requirement for Automotive

Responsibility of / Expectations from the Role

Writing technical specifications for Automotive components

Proposing ideas to meet component cost target

Supplier management

Component Validation

Writing technical specifications for Automotive components

If you are interested for this Above role,

Kindly spend few minutes to fill the below details and revert back [email protected] (with Updated CV).

(Note: The details are collected to do a basic HR screening to initiate discussion for your candidature)

Full Name-

Current Location-

Mobile-

Total Experience –

Relevant Experience –

Current CTC –

Expected CTC – 

Highest Qualification –

Notice period in current company –

Current Company –

Gaps (Educational or between Jobs) – (mention in detail if any)

Note: Send with your latest CV/Resume (mandatory)

Once the details are sent, Our team will get back to you for further discussion!

Note:

We encourage you to register at www.tcs.com/careers for exploring an exciting career with TCS. At the time of your application to TCS, the personal data contained in your application and resume will be collected by TCS and processed for the purpose of TCS’s recruitment related activities

Seniority Level

Mid-Senior level

Industry

• Information Technology & Services 
• Automotive

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

Ola Electric Mobility Pvt. Ltd. 

Positioin : EV Powertrain Validation Engineer

Key skills required:

• Experienced in Motor and motor controller testing on bench and vehicle level.
• Experience in working and operating Chassis Dyno and Motor Dyno.
• Sound knowledge of motor parameters and its effect on the vehicle dynamics.
• Sound knowledge of working principles of different types of motors used in EV automotive (PMSM, PMAC, BLDC, Induction etc.)
• Experience in working with CAN based data systems and tracing back the CAN messages.
• Experience with custom rig building and bench level setup building for complete powertrain testing
• Experience with using Power analysers and mapping out the efficiencies and other parameters.
• Sound knowledge on powertrain cooling testing analysis.
• Familiar with IP and vibration testing.

• Knowledge of functional and durability testing of mechanical systems (bearings, gearbox stator and rotor).
• Familiar with electric vehicle power electronics architecture.
• Experience in Root Cause Analysis methods and provide solutions to support design/process improvements
• Understanding of software systems/software interface testing is desirable.

Roles and responsibilities:

Manage the complete EV Powertrain validation and testing activities.

• Prepare test roadmaps, timelines, detailed test plan and status reports for component level and system level powertrain testing activities
• Support internal engineering teams on test data, reports, FMEA/DVP etc.
• Support the design team in making concept decisions based on testing.
• Lead analysis testing related to motor and motor controller (functionality, performance and safety) of the overall powertrain systems
• Hardware testing through software automation, bench testing and data logging.
• Analysis of data collected for all the DVP cases.
• Support the implementation of environmental and safety best practices.
• Understanding of various test standards and guidance towards creating new test standards.
• Help in forming DOEs and a structured approach towards testing, prioritize tests based on DFMEA/DVP, planning for execution of multiple tests in shorter timelines.
• Manage a team of test engineers/technicians. Support in establishing in house test lab/test facility.

Experience: 2 to 6  years

Qualification: B.Tech/B.E./M.E./M.Tech

Seniority Level

Mid-Senior level

Industry

• Automotive 
• Aviation & Aerospace 
• Electrical & Electronic Manufacturing

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

AMPFINITY ENERGIES PVT LTD 

Position : Sales Executive

Experience :

Looking for sales executive for electric vehicle with 3-4 years of good sales experience, Profile with Excellent communication and high persuasion skills required.

Qualification :

Tech Diploma/Graduate/BBA/MBA

Location :

Pune, Maharastra, India

Employment Type

Full-time

Apply Now

Ola Electric Mobility Pvt. Ltd.

Position : Manager – Charger Testing

Key skills required:

• Experience in electrical functionality/performance, integration, safety and homologation testing of Charging stations/bulk chargers/portable chargers for EV battery charging
• Hands on experience on Electrical safety related tests like Insulation Resistance, Dielectric withstand, Reverse Polarity, Fault Protection, Ground bond test, etc.
• Experience with Testing agencies for EMI/EMC and HALT tests.
• Experience in Wiring harness testing and metering/energy consumption test.
• Understanding of Battery/BMS and charger testing – Power/Energy Consumption, CC-CV Transition, Charging time, Voltage/Current sensing, Thermal protection and safety testing
• Familiar with power electronics topology and mechanical, electrical, thermal and EMI EMC analysis of power converters used in charging systems.

• Familiar with IP and vibration testing.
• Knowledge of functional and durability testing of mechanical systems (charging station experience preferred).
• knowledge of Charger related testing standards (IEC 62840, IEC 61851, IS 17017, AIS etc.)
• Sound knowledge of charger and its components cooling. HVAC cooling.
• Familiar with electric vehicle power electronics architecture.
• Experience in Root Cause Analysis methods and provide solutions to support design/process improvements
• Understanding of software systems/software interface testing is desirable.

Roles and responsibilities:

Manage the complete EV charger Systems validation and testing activities.

• Prepare test roadmaps, timelines, detailed test plan and status reports for component level, system level and Charger level testing activities
• Support internal engineering teams on test data, reports, FMEA/DVP etc.
• Support the design team in making concept decisions based on testing.
• Lead analysis testing related to Electrical and Electronics (functionality, performance and safety) of the overall charging systems
• Hardware testing through software automation and data logging.
• Analysis of data collected for all the DVP cases.
• Support the implementation of environmental and safety best practices.
• Understanding of various test standards and guidance towards creating new test standards.
• Help in forming DOEs and a structured approach towards testing, prioritize tests based on DFMEA/DVP, planning for execution of multiple tests in shorter timelines.
• Manage a team of test engineers/technicians.
• Support in establishing in house test lab/test facility

Software/Tools/System Exposure:

• Hands on tools like IR Tester, RCD tester, Leakage current meter, Power/Energy meter, HIL testing, Oscilloscope, Thermal testing, Vibration Testing, thermocouples, Pcan view, Vector CANOE/CANalyzer (added advantage)

Seniority Level

Mid-Senior level

Industry

• Automotive 
• Aviation & Aerospace 
• Electrical & Electronic Manufacturing

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now

Polaris Inc

Position : Electrical Engineer

Education, Skills And Knowledge

• B.S. or higher in Electrical or Computer Engineering required.
• Experience with design and/or implementation of controls, especially related to vehicle controls/diagnostics/communication required
• Experience with software and/or hardware V&V efforts including MIL/SIL/HIL, other low-level software verification, and related documentation required
• Experience with DFMEA, SFMEA, and Functional Safety strongly desired
• Ability to work efficiently in a fast-paced development environment required
• Experience with Electric & Hybrid Powertrain vehicle control strategies is strongly preferred
• Experience in effective problem solving and troubleshooting required
• Experience with communication networks required, CAN and J1939 strongly preferred
• Familiarity with requirement and test case management in any requirement/software development database application as well as configuration management preferred.
• Experience in project management strongly preferred

Seniority Level

Entry level

Industry

• Automotive 
• Consumer Goods 
• Military

Employment Type

Full-time

Job Functions

• Engineering 
• Information Technology

Apply Now