Reading:
What is Emitter feedback bias.

What is Emitter feedback bias.

Emitter-feedback bias is the result of adding an emitter resistor to the base-bias circuit, as depicted in Figure. The thought is to assist with making base predisposition more unsurprising with negative criticism, which refutes any endeavored change in authority current with a contradicting change in base voltage. Because VB = VE + VBE, an attempt to increase the collector current results in an increase in the emitter voltage, which in turn raises the base voltage.

The voltage across RB decreases as a result of this increase in base voltage, resulting in a decrease in base current and preventing an increase in collector current. If the collector current attempts to decrease, a similar action takes place. This is superior to base bias for linear circuits, but it still relies on DC and is less predictable than voltage-divider bias. You can write Kirchhoff’s voltage law (KVL) around the base circuit to calculate IE.

Did you find this article helpful?
0 out of 0 found this helpful
Still have questions? Open a Support Ticket


0 Comments

Leave a Reply

Arrow-up

Book Your Free Session Now

Fill in the form below to book a 30 min no-obligation consulting session.

we will reply within 24 hours.